FME Transformers: 2024.1
FME Transformers: 2024.1
EllipsePropertySetter
Modifies or creates ellipse geometry according to new coordinate, radii, rotation, or orientation values.
Typical Uses

Modifying ellipse or circle geometry
How does it work?
The EllipsePropertySetter receives features with ellipse or point geometry. Ellipses are modified if any values provided in parameters differ from the input geometry. Points are converted to ellipses if at least a New Primary Radius value is provided.
The parameters may modify or create an ellipse as a closed Arc By Center Point by the following:

Center X, Y, and Z coordinates

Primary and Secondary Radius in ground units

Rotation in degrees

Orientation

An assumed sweep of 360 degrees
Values may be entered or provided through attribute values, expressions, or user parameters.
Features without valid ellipse or point geometry will be rejected, as will points that do not have the required parameter values to create an ellipse.
For more information on ellipse geometry see Ellipse.
Examples
Example: Modifying ellipses
In this example, we have a set of ellipse features and wish to set them all to the same rotation.
The features are routed into an EllipsePropertySetter.
In the parameters dialog, a New Rotation value is provided.
The output ellipses are modified accordingly.
Usage Notes

To create ellipses, consider using the 2DEllipseReplacer.

To extract ellipse properties to use in expressions, use an EllipsePropertyExtractor before the EllipsePropertySetter.
Creating and Modifying Arcs, Circles, and Ellipses
These transformers work with arcs in a variety of ways.
Arc Transformers Comparison

Function 
Geometry Out 
Z Coordinates 

Creates one or more new features with arc geometry (when Geometry Object is an arc type). 
Arc by center point Arc by center point with ends Arc by 3 points Arc by bulge Ellipse (Arc by center point) 
Supported 

Replaces any existing feature’s geometry with a 2D arc. 
Arc by center point 
No 

Replaces any existing feature’s geometry with a 3D arc. 
Arc by center point 
Yes, at center point 

Replaces an existing feature’s geometry with a 2D ellipse or circle (closed arc). 
Ellipse (Arc by center point) 
No 

Modifies an existing arc or converts a point to an arc. 
Arc by center point Arc by center point with ends Arc by 3 points 
Supported, at center and/or ends 

Modifies an existing ellipse (closed arc) or converts a point to an ellipse. 
Ellipse (Arc by center point) 
Supported, at center point 

Extracts the property values that describe an arc’s geometry and stores them as attributes. 
Arc by center point Arc by center point with ends Arc by 3 points Arc by bulge 
Supported 

Extracts the property values that describe an ellipse’s geometry and stores them as attributes. 
Ellipse (Arc by center point) 
Supported 

Converts arcs and ellipses to lines or polygons by interpolating points along the arc. 
Path Line Area 
Supported 

Replaces geometry with an arc described by the first, middle, and last vertices of the input feature. 
Arc by 3 points 
Supported 

Replaces lines or polygons with an optimal combination of line and arc segments, creating smooth curving lines. 
Path Area Arc by bulge Line 
Supported 

Reduces point density on lines or polygons, fitting arcs where possible (When using Algorithm > Douglas With Arc Fitting (Generalize) ). 
Path Area Arc by 3 points Line 
Supported 

Either replaces an existing feature’s geometry with circle that contains all of its vertices or extracts the circle property values into attributes. 
Ellipse (Arc by center point) 
No 
Configuration
Input Ports
Input
Features with ellipse or point geometry.
Output Ports
Output
Features with ellipse geometry modified or created as specified in parameters.
<Rejected>
Features without valid ellipse or point geometry are output via this port, as well as points that do not have the required parameter values to create an ellipse.
Features that receive nonnumeric values for any numeric parameters are output via this port.
Rejected features will have an fme_rejection_code attribute with one of the following values:
INVALID_GEOMETRY_TYPE
INVALID_PARAMETER_PRIMARY_RADIUS
INVALID_PARAMETER_SECONDARY_RADIUS
INVALID_PARAMETER_ROTATION
INVALID_PARAMETER_CENTER_POINT
Rejected Feature Handling: can be set to either terminate the translation or continue running when it encounters a rejected feature. This setting is available both as a default FME option and as a workspace parameter.
Parameters
General
New Primary Radius 
Specify the new primary radius of the ellipse in ground units. Note that the primary radius need not be larger than the secondary, however, the rotation angle is always measured from the x axis to the primary axis. For a circle, set both the primary and secondary radius to the same value. 
New Secondary Radius 
Specify the new secondary radius of the ellipse in ground units. 
New Rotation 
Specify the new rotation in degrees of the primary axis from horizontal (if any). 
New Orientation 
Can change the orientation of a feature, following the righthand rule or the lefthand rule. 
New Center X 
Specify the new X coordinate of the ellipse’s origin. 
New Center Y 
Specify the new Y coordinate of the ellipse’s origin. 
New Center Z 
Specify the new Z coordinate of the ellipse’s origin. 
Editing Transformer Parameters
Transformer parameters can be set by directly entering values, using expressions, or referencing other elements in the workspace such as attribute values or user parameters. Various editors and context menus are available to assist. To see what is available, click beside the applicable parameter.
How to Set Parameter Values
Defining Values
There are several ways to define a value for use in a Transformer. The simplest is to simply type in a value or string, which can include functions of various types such as attribute references, math and string functions, and workspace parameters.
Using the Text Editor
The Text Editor provides a convenient way to construct text strings (including regular expressions) from various data sources, such as attributes, parameters, and constants, where the result is used directly inside a parameter.
Using the Arithmetic Editor
The Arithmetic Editor provides a convenient way to construct math expressions from various data sources, such as attributes, parameters, and feature functions, where the result is used directly inside a parameter.
Conditional Values
Set values depending on one or more test conditions that either pass or fail.
Parameter Condition Definition Dialog
Content
Expressions and strings can include a number of functions, characters, parameters, and more.
When setting values  whether entered directly in a parameter or constructed using one of the editors  strings and expressions containing String, Math, Date/Time or FME Feature Functions will have those functions evaluated. Therefore, the names of these functions (in the form @<function_name>) should not be used as literal string values.
Content Types
These functions manipulate and format strings.  
Special Characters 
A set of control characters is available in the Text Editor. 
Math functions are available in both editors.  
Date/Time Functions  Date and time functions are available in the Text Editor. 
These operators are available in the Arithmetic Editor.  
These return primarily featurespecific values.  
FME and workspacespecific parameters may be used.  
Creating and Modifying User Parameters  Create your own editable parameters. 
Dialog Options  Tables
Table Tools
Transformers with tablestyle parameters have additional tools for populating and manipulating values.
Row Reordering

Enabled once you have clicked on a row item. Choices include:

Cut, Copy, and Paste

Enabled once you have clicked on a row item. Choices include:
Cut, copy, and paste may be used within a transformer, or between transformers. 
Filter

Start typing a string, and the matrix will only display rows matching those characters. Searches all columns. This only affects the display of attributes within the transformer  it does not alter which attributes are output. 
Import

Import populates the table with a set of new attributes read from a dataset. Specific application varies between transformers. 
Reset/Refresh

Generally resets the table to its initial state, and may provide additional options to remove invalid entries. Behavior varies between transformers. 
Note: Not all tools are available in all transformers.
For more information, see Transformer Parameter Menu Options.
Reference
Processing Behavior 

Feature Holding 
No 
Dependencies  None 
Aliases  
History 
FME Community
The FME Community is the place for demos, howtos, articles, FAQs, and more. Get answers to your questions, learn from other users, and suggest, vote, and comment on new features.
Search for all results about the EllipsePropertySetter on the FME Community.
Examples may contain information licensed under the Open Government Licence – Vancouver, Open Government Licence  British Columbia, and/or Open Government Licence – Canada.