Autodesk AutoCAD RealDWG DWG/DXF Writer Parameters

This parameter specifies the default manner in which attribute data will be stored. Note that storing attributes greatly increases the size of the output AutoCAD file.

Extended Entity Data

Attribute: extended_entity_data

If selected, stores attributes as extended entity data. For more information, see Extended Entity Data.

Inserts

Specifies whether the writer should use the attribute definitions that are found within blocks when placing inserts.

If not selected, then all the attributes on a feature that is passed to the writer are written as insert attributes. If selected, then only the attributes defined within the block being placed are stored as insert attributes.

Limited (default)

Attribute: external_attributes

Instructs the writer to not store any attribution in the AutoCAD file, with the exception of extended entity data list formatted attributes as created by the AutoCAD reader.

Specify the AutoCAD release that will be compatible with the output file.

A template file is an AutoCAD file that defines layers, line styles, blocks and shape definitions which are referenced during translation. This option allows you to define the template file by entering a template filename or browsing to a file location.

Note: Note: Template files are also known as prototype files.

The application name that is used when writing extended entity data.

When this parameter is set to Yes (default), only those attributes defined as part of the layer definition will be stored. See the DEF directive for more details.

If this parameter is set to No, most feature attributes (except those that start with autocad) are stored.

Specifies the folder in which to look for shape files (*.shp) from which information about SHAPE entities will be extracted for writing. For more information, see Shapes.

The names of blocks created by the writer during automatic block creation.

This parameter may be used to specify a prefix for block names that are created by the writer during automatic block generation. Automatic block generation occurs for features written with aggregate and other geometries which are best represented by block entities.

This parameter is only used when Use the Block Name to Create Blocks parameter is set to No, and is not used for features that already have an autocad_block_name attribute specified.

The names of created blocks will take the form:

<Block Name Prefix>_<blocknumber>

This parameter controls whether the writer will optionally store the coordinate system of its features. The coordinate system can be stored inside the output AutoCAD file as an Esri Well Known Text (in an ESRI_PRJ entry in an internal dictionary in the file), according to Esri specifications. It can also be stored externally in a companion Esri .prj file that shares the output AutoCAD file's base name, but has a .prj extension.

Values: NONE (projection information is not stored anywhere) | EXTERNAL_PRJ | EXTERNAL_AND_INTERNAL | INTERNAL_WKT

AutoCAD data files written this way with projection information will be recognized by FME and the free ArcGIS for AutoCAD application, which installs on top of the AutoCAD application.

This parameter can be used to allow the file specified in the Destination Autodesk AutoCAD File parameter to be written as the concatenation of the Model Space contents of the file specified by the Template File parameter (described above) with all written data.

By default, it is set to No, so only header information but no Model Space entities are used from the template file if one is specified. If this parameter is set to Yes, then the full header and Model Space entities are used from the template file.

This parameter can be used to allow the file specified in the Destination Autodesk AutoCAD File parameter to be written as the concatenation of the Paper Space contents of the file specified by the Template File parameter (described above) with all written data.

By default, it is set to Yes, so the Paper Space entities are used from the template file if one is specified. If this parameter is set to No, then the Paper Space entities are not used from the template file.

This parameter can be used to toggle purging of unused objects or entities before the final drawing file is written out.

Unused objects are those which are not referenced by other objects in the drawing. For example, for a layer to be eligible to be purged, there must be no entities on that layer.

If set to Yes, the AutoCAD Writer will attempt to purge the following object types:

• Blocks
• Layers
• Detail View Styles
• Dimension Styles
• Groups
• Linetypes
• Materials
• MLine Styles
• MLeader Styles
• Registered Applications
• Section View Styles
• Table Styles
• Text Styles
• Visual Styles

This parameter can be used to change how donut geometries on features with autocad_entity attributes not set to autocad_hatch or autocad_mpolygon, are represented as AutoCAD entities.

If this parameter is set to Yes, and a donut is planar, then it will be written as a hatch entity. Donuts with three dimensions will only be written as hatches if they have a constant Z value, which can be stored as the hatch elevation.

If a donut is not oriented in the XY plane, then the feature must have autocad_extrusion_x, autocad_extrusion_y, and autocad_extrusion_z attributes set which indicate the normal vector direction, orthogonal to the plane of the object. If not, the hatch may have Z values dropped, to force it into the XY plane.

If this parameter is set to No, or a donut is not planar, then that donut will be handled like a multi-area geometry, and will be written as a block.

This parameter can be used to set the INSUNITS variable of the destination dataset to one of the following units:

UNDEFINED | INCHES | FEET | MILES | MILLIMETERS | CENTIMETERS | METERS | KILOMETERS | MICROINCHES | MILS | YARDS | ANGSTROMS | NANOMETERS | MICRONS | DECIMETERS | DEKAMETERS | HECTOMETERS | GIGAMETERS | ASTRONOMICAL | LIGHTYEARS | PARSECS

When this parameter is not set, the INSUNITS variable is taken from a template file, if specified. The INSUNITS variable specifies the drawing units used in the scaling of inserted entities such as blocks.

This parameter behaves like a declaration of the type of units, but it does not change the scale or coordinates of existing entities, nor does it affect any entities to be written by the AutoCAD writer.