GeometryReplacer

Replaces the geometry of a feature according to the setting of the geometry encoding parameter. This transformer is typically used to restore geometry previously extracted into an attribute by the GeometryExtractor.

Usage Notes

If a feature with existing geometry has that geometry replaced using this transformer, and the new geometry is a different type (replacing an area with a point, for example), the feature's existing geometry-related format-specific attributes (such as geodb_type, autocad_entity, or shapefile_type) will be removed.
The feature's fme_ attributes should be referred to instead, such as fme_type and fme_geometry.
See also: About Feature Type Attributes and fme_type
Geometry stored as an attribute may not retain its coordinate system. If the new geometry is in a different coordinate system, use a CoordinateSystemSetter to set it.

Configuration

Parameters

General

Geometry Encoding

This parameter can be set to Encoded Polyline, Esri JSON, FME Binary, FME XML, Geo (Microformat), Geohash, GeoJSON, GeoRSS Simple Encoding, Geotagging GeoSMS (RFC 5870), GML, hexadecimal-encoded FME Binary, hexadecimal-encoded OGC Well Known Binary (wkbhex), ISO 6709 Geographic Point, KML, MGRS, Microsoft SQL Server Binary, OGC Open GeoSMS, OGC Well Known Binary (wkb), OGC Well Known Text (wkt), Parseable Encoded FME XML, or QlikMaps Encoded Polyline.

The most efficient and truest representation of the geometry is FME Binary, and this should be used in most cases. All the FME representations can accommodate all aspects of FME Enhanced Geometry, including measures and paths consisting of multiple linear segments; however, both the FME XML and Hex Encoded FME Binary representations impose some overhead in translating between the internal binary representation and the ASCII-encoded representation.

The OGC variants are useful if interaction with other OGC supporting systems is required. However, some characteristics of geometries may have been lost in these modes; for instance, any path will be flattened into a single linestring. For OGC Well Known Text and OGC Well Known Binary, if measures are specified in the source, they will be saved as the "default" (unnamed) measure on the generated geometry.

When converting from WKT or WKB, if the specified attribute has a blank value, the feature's geometry will be left untouched and a warning will be output. This is important to remember if a GeometryExtractor was used to generate an attribute which was used in this transformer, because that transformer produces an empty value whenever it encounters a feature with no geometry.

The Parseable Encoded FME XML option is used to take the geometry representation used by the Creator transformer and set the geometry from that.

The GeoJSON, Esri JSON and GeoRSS encodings may not preserve all geometry characteristics. For example, arcs will be stroked to lines, and ellipses stroked to polygons. GeoJSON does not support measures.

The GML encoding option is used to de-serialize GML geometries. If more than one geometry is found in the source geometry, then an aggregate of the geometries is returned.

The Geohash encoding option stores the geometry as a string of characters that can be decoded as either a point or a rectangular area.

The OGC Open GeoSMS, Geotagging GeoSMS and Geo (Microformat) encoding options will extract a point from the given format.

The ISO 6709 Geographic Point encoding is used to de-serialize ISO 6709 geographic points into point geometries. A multi point geometry is created if the source data contains multiple geographic points.

The Encoded Polyline encoding is useful if working with the Google Maps API and can be used to represent points, lines and polygons.

The QlikMaps Encoded Polyline encoding is like the Encoded Polyline encoding, but it can also be used to represent donuts and multi areas.

The MGRS encoding is used to convert Military Grid Reference System (MGRS) code to longitude and latitude coordinates. The geometry of an input feature will be replaced with a point at the longitude/latitude values obtained from the MGRS code.

The Microsoft SQL Server Binary encoding is used to de-serialize geometries from the native storage format used in Microsoft SQL Server.

Geometry Source

The encoded representation of the geometry to assign to the feature. An attribute can be selected if one contains this value, or text may be entered directly or fetched from a workspace parameter.

Remove Attribute

If this parameter is set to Yes, the attribute specified in Geometry Source will be removed from the resulting feature. This parameter has no effect if an attribute was not specified.

Encoding Specific Parameters

Geohash - Decode geohash as	You can choose to decode a geohash as either a point or a rectangular area. If decoded as a point, the area information is stored as attributes.
GML SRS Axis Order	If Geometry Encoding is GML, this parameter can be used to force interpretation of the <gml:pos> and <gml:posList> into a particular axis order.
MGRS Ellipsoid	The ellipsoid used for the conversion. This can be any ellipsoid name supported by FME.
MGRS Lettering Type	The type of lettering used can be WGS84 or Bessel.
MS SQL Server Format	If Geometry Encoding is Microsoft SQL Server Binary, choose whether it is a serialized Geometry or Geography.
OGC WKT Precision	If Geometry Encoding is OGC Well Known Text, this parameter can be used to control the precision used when converting numerical strings to floating-point.

Editing Transformer Parameters

Transformer parameters can be set by directly entering values, using expressions, or referencing other elements in the workspace such as attribute values or user parameters. Various editors and context menus are available to assist. To see what is available, click beside the applicable parameter.

How to Set Parameter Values

Defining Values

There are several ways to define a value for use in a Transformer. The simplest is to simply type in a value or string, which can include functions of various types such as attribute references, math and string functions, and workspace parameters.

Using the Text Editor

The Text Editor provides a convenient way to construct text strings (including regular expressions) from various data sources, such as attributes, parameters, and constants, where the result is used directly inside a parameter.

Text Editor

Using the Arithmetic Editor

The Arithmetic Editor provides a convenient way to construct math expressions from various data sources, such as attributes, parameters, and feature functions, where the result is used directly inside a parameter.

Arithmetic Editor

Conditional Values

Set values depending on one or more test conditions that either pass or fail.

Parameter Condition Definition Dialog

Content

Expressions and strings can include a number of functions, characters, parameters, and more.

When setting values - whether entered directly in a parameter or constructed using one of the editors - strings and expressions containing String, Math, Date/Time or FME Feature Functions will have those functions evaluated. Therefore, the names of these functions (in the form @<function_name>) should not be used as literal string values.

Content Types

String Functions	These functions manipulate and format strings.
Special Characters	A set of control characters is available in the Text Editor.
Math Functions	Math functions are available in both editors.
Date/Time Functions	Date and time functions are available in the Text Editor.
Math Operators	These operators are available in the Arithmetic Editor.
FME Feature Functions	These return primarily feature-specific values.
FME Parameters	FME and workspace-specific parameters may be used.
Creating and Modifying User Parameters	Create your own editable parameters.

Dialog Options - Tables

Table Tools

Transformers with table-style parameters have additional tools for populating and manipulating values.

Row Reordering

Enabled once you have clicked on a row item. Choices include:

Add a row
Remove a row
Move current row up one
Move current row down one
Move current row to top
Move current row to bottom

Cut, Copy, and Paste

Enabled once you have clicked on a row item. Choices include:

Cut a row - delete and copy to clipboard
Copy a row to the clipboard
Paste a row from the clipboard

Cut, copy, and paste may be used within a transformer, or between transformers.

Filter

Start typing a string, and the matrix will only display rows matching those characters. Searches all columns. This only affects the display of attributes within the transformer - it does not alter which attributes are output.

Import

Import populates the table with a set of new attributes read from a dataset. Specific application varies between transformers.

Reset/Refresh

Generally resets the table to its initial state, and may provide additional options to remove invalid entries. Behavior varies between transformers.

Note: Not all tools are available in all transformers.

For more information, see Transformer Parameter Menu Options.

Reference

Processing Behavior	Feature-Based
Feature Holding	No
Dependencies	None
Aliases	EncodedPolylineGeometryReplacer EsriJSONGeometryReplacer FMEBinaryGeometryReplacer FMEXMLGeometryReplacer GeoGeometryReplacer GeohashGeometryReplacer GeoJSONGeometryReplacer GeoRSSGeometryReplacer GeotaggingGeoSMSGeometryReplacer GMLGeometryReplacer HexEncodedFMEBinaryGeometryReplacer HexEncodedOGCWellKnownBinaryGeometryReplacer ISO6709GeographicPointGeometryReplacer KMLGeometryReplacer MGRSGeometryReplacer MicrosoftSQLServerBinaryGeometryReplacer OGCOpenGeoSMSGeometryReplacer OGCWellKnownBinaryGeometryReplacer OGCWellKnownTextGeometryReplacer ParseableEncodedFMEXMLGeometryReplacer QlikMapsEncodedPolylineGeometryReplacer
History

FME Community

The FME Community has a wealth of FME knowledge with over 20,000 active members worldwide. Get help with FME, share knowledge, and connect with users globally.

Search for all results about the GeometryReplacer on the FME Community.

Examples may contain information licensed under the Open Government Licence – Vancouver, Open Government Licence - British Columbia, and/or Open Government Licence – Canada.