Matcher

Detects features that are matches of each other. Features are declared to match when they have matching geometry, matching attribute values, or both. A list of attributes which must differ between the features may also be specified.

Jump to Configuration

Typical Uses

Change detection
Feature merging (data joins) based on geometry

How does it work?

The Matcher can receive any number of input feature streams. All features are compared against all other features, and matches are identified based on the parameters defined.

Options for matching include geometry and/or attributes, and you may also define attributes that must differ.

All features that find a match are output via the Matched port (that is, if two features match each other, both of them are output here). Each set of matches is given a new numeric Match ID attribute that can be used to identify them as a matching group.

A single copy of each set of matched features is sent to the SingleMatched port. The attributes on these features are merged on to one output feature. Using this port, the Matcher is capable of doing multi-feature merging using geometry as the key. This complements the FeatureMerger, which only accepts attributes, and not geometries, as keys.

Features that do not find a match are output via the NotMatched port.

Examples

Usage Notes

The ChangeDetector provides an alternative (but less general) approach which may be more convenient for certain applications.
When looking for matches based only on attributes, consider the FeatureJoiner or FeatureMerger for better performance.
Oriented points are supported, however, precision loss when converting between orientation representations will often cause the ChangeDetector and Matcher to identify two oriented points as Updated/NotMatched unless Lenient Geometry Matching is enabled.

Choosing a Feature Joining Method

Many transformers can perform data joining based on matching attributes, expressions and/or geometry. When choosing one for a specific joining task, considerations include the complexity of the join, data format, indexing, conflict handling, and desired results. Some transformers use SQL syntax, and some access external databases directly. They may or may not support list attribute reading and creation.

Generally, choosing the one that is most specific to the task you need to accomplish will provide the optimal performance results. If there is more than one way to do it (which is frequently the case), time spent on performance testing alternate methods may be worthwhile. Performance may vary greatly depending on the existence of key indexes when reading external tables (as opposed to features already in the workspace).

Joining Transformers Comparison Matrix

Transformer	Match By	Uses SQL Statements	Can Create List	Input Type	Notable	Description
FeatureJoiner	Attributes	No	No	Features	Best performance for simple joins on attribute values Cannot create lists - represents multiple joins as multiple output features Cannot use constructed keys or expressions	Joins features by combining the attributes and/or geometry of features based on common key attribute values. Performs the equivalent of Inner, Left, and Full SQL joins.
FeatureMerger	Attributes	No	Yes	Features	Can use expressions as keys (constructed keys) Can create lists – represents multiple joins as a list on a single feature Cannot match on geometry	Merges the attributes and/or geometry of one set of features onto another set of features, based on matching key attribute values and expressions.
ListBasedFeatureMerger	List Attribute to Single Attribute	No	Yes	Features	Only joining transformer to use all list attribute contents as keys (others may use one specific value in a list, but not the entire list)	Merges the attributes and/or geometry of one set of features onto another set of features, based on matching list attribute values with key attribute values and expressions.
InlineQuerier	SQL query	Yes	No	Features	Use SQL on non-SQL data Allows multiple join/SQL statements, and so can replace multiple transformers with one	Creates a set of SQLite database tables from incoming features, executes SQL queries against them, and outputs the results as features.
SQLCreator	SQL query	Yes	No	External DB	Best if all features already in SQL-capable source Read an external DB table mid-translation	Generates FME features from the results of a SQL query executed once against a database. One FME feature is created for each row of the results of the SQL query.
SQLExecutor	SQL query	Yes	No	External DB	Best for complex joins between features and SQL-capable source Read an external DB table mid-translation	Executes SQL queries against a database. One query is issued to the database for each initiating feature that enters the transformer. Both the initiating features and the results of the query may be output as features.
DatabaseJoiner	Attributes	No	Yes	External DB and Features	Best for simple joins between features and a database table Very efficient if keys indexed, and caches data locally Read an external DB table mid-translation Non-blocking	Joins attributes from an external table to features already in a workspace, based on a common key or keys. SQL knowledge not required. Non-blocking transformer.
Matcher	Geometry and/or Attributes	No	Yes	Features	The only one of these methods that can use geometry as key for matching Can look for attribute differences Uses geometry, not spatial relationships	Detects features that are matches of each other. Features are declared to match when they have matching geometry, matching attribute values, or both. A list of attributes which must differ between the features may also be specified. If matching on attributes only (not geometry), using the FeatureMerger or another method will give better performance.

Configuration

Input Ports

Output Ports

Parameters

Check Attributes

Attribute Matching Strategy

In conjunction with Selected Attributes, this parameter controls which attributes of input features must have the same value before a match is declared.

Match Selected Attributes: the attributes specified in the Selected Attributes parameter will be matched.
Match All Except Selected Attributes: all attributes will be matched, except those specified in Selected Attributes (and in Attributes That Must Differ). Matching is performed on all attributes, including unexposed format attributes.
Match All Attributes: the only fields excluded from the match are those given by Attributes That Must Differ, if any. Matching is performed on all attributes, including unexposed format attributes.

Selected Attributes

Applicable when Attribute Matching Strategy is set to Match Selected Attributes or Match All Except Selected Attributes, and specifies which attributes to match, or exclude from the match, depending on the matching strategy chosen.

Attributes That Must Differ

Controls which attributes that are part of the input feature must have different values before a match is declared. The values from all attributes matching the regular expression are concatenated together and compared to determine a match.

Check Geometry

Match Geometry	Controls whether 2D or 3D (or no) geometry must be the same before a match is declared. FULL makes sure 3D, measures, and geometry traits all match. When comparing raster geometries: 2D matches the properties 3D matches the properties and values FULL matches the properties, values and geometry traits. When comparing surface and solid geometries: 2D behaves the same way as 3D, that is, Z values will also be compared. When comparing point cloud geometries: 2D and 3D match the properties FULL matches the properties and component values
Differentiate Empty, Missing, and Null Traits	No: Empty, missing, and null traits (and names) will be treated as equivalent. Yes: Empty, missing, and null traits (and names) will be considered as pairwise different.
Lenient Geometry Matching	If Yes, then the order of points in line and area features will be ignored. Note that areas may have differing start/end vertex locations and still match if all coordinates fall within the Vector Tolerance distance (in ground units). For lines to match, however, including closed lines, they must have matching start and matching end vertices, within tolerance. Composition differences between paths, lines, and other curves will be ignored. The order of elements in collections, and the order of holes in Donuts will be ignored. When comparing raster geometries, only the extents are compared.
Check Coordinate Systems	No: The Coordinate Systems are ignored Yes: The name of the Coordinate System must be the same for both features
Vector Tolerance	Vector Tolerance allows two geometries to have spatial variation and still be considered a match. It only applies to vector based geometries (points, curves, areas). Provide a value in ground units. It is similar to a Fréchet distance: You have a dog leash of length “vector tolerance.” You will walk along the boundary of one of the geometries, your dog will walk along the boundary of the other. If you can both complete your walk without dropping the leash, the two geometries are within tolerance. This transformer has the added constraint for curves that you and your dog must both start at one end of your curve, and end at the other.

Note: For surface and solid geometries, Vector Tolerance is ignored and assumed to be 0.0.

Editing Transformer Parameters

Using a set of menu options, transformer parameters can be assigned by referencing other elements in the workspace. More advanced functions, such as an advanced editor and an arithmetic editor, are also available in some transformers. To access a menu of these options, click beside the applicable parameter. For more information, see Transformer Parameter Menu Options.

Defining Values

There are several ways to define a value for use in a Transformer. The simplest is to simply type in a value or string, which can include functions of various types such as attribute references, math and string functions, and workspace parameters. There are a number of tools and shortcuts that can assist in constructing values, generally available from the drop-down context menu adjacent to the value field.

How to Set Parameter Values

Using the Text Editor

The Text Editor provides a convenient way to construct text strings (including regular expressions) from various data sources, such as attributes, parameters, and constants, where the result is used directly inside a parameter.

Text Editor

Using the Arithmetic Editor

The Arithmetic Editor provides a convenient way to construct math expressions from various data sources, such as attributes, parameters, and feature functions, where the result is used directly inside a parameter.

Arithmetic Editor

Conditional Values

Set values depending on one or more test conditions that either pass or fail.

Parameter Condition Definition Dialog

Content

Expressions and strings can include a number of functions, characters, parameters, and more.

When setting values - whether entered directly in a parameter or constructed using one of the editors - strings and expressions containing String, Math, Date/Time or FME Feature Functions will have those functions evaluated. Therefore, the names of these functions (in the form @<function_name>) should not be used as literal string values.

Content Types

String Functions	These functions manipulate and format strings.
Special Characters	A set of control characters is available in the Text Editor.
Math Functions	Math functions are available in both editors.
Date/Time Functions	Date and time functions are available in the Text Editor.
Math Operators	These operators are available in the Arithmetic Editor.
FME Feature Functions	These return primarily feature-specific values.
FME Parameters	FME and workspace-specific parameters may be used.
Creating and Modifying User Parameters	Create your own editable parameters.

Dialog Options - Tables

Transformers with table-style parameters have additional tools for populating and manipulating values.

Table Tools

Row Reordering

Enabled once you have clicked on a row item. Choices include:

Add a row
Remove a row
Move current row up one
Move current row down one
Move current row to top
Move current row to bottom

Cut, Copy, and Paste

Enabled once you have clicked on a row item. Choices include:

Cut a row - delete and copy to clipboard
Copy a row to the clipboard
Paste a row from the clipboard

Cut, copy, and paste may be used within a transformer, or between transformers.

Filter

Start typing a string, and the matrix will only display rows matching those characters. Searches all columns. This only affects the display of attributes within the transformer - it does not alter which attributes are output.

Import

Import populates the table with a set of new attributes read from a dataset. Specific application varies between transformers.

Reset/Refresh

Generally resets the table to its initial state, and may provide additional options to remove invalid entries. Behavior varies between transformers.

Note: Not all tools are available in all transformers.

Reference

Processing Behavior	Group-Based
Feature Holding	Yes
Dependencies	None
Aliases
History

FME Community

The FME Community is the place for demos, how-tos, articles, FAQs, and more. Get answers to your questions, learn from other users, and suggest, vote, and comment on new features.

Search for all results about the Matcher on the FME Community.

Examples may contain information licensed under the Open Government Licence – Vancouver and/or the Open Government Licence – Canada.

Match ID	An ID is added to each set of matched features so that it is possible to build a relationship between them if required.
Match Count Attribute on SingleMatched	If provided, an attribute with this name will be added to each SingleMatched output, set to the number of contributing input features.