AzureFileStorageConnector

Accesses the Azure File Storage file storage service to upload, download, or delete files and folders or list file/folder information from an Azure account.

Jump to Configuration

Typical Uses

Manage datasets on File Storage by uploading, downloading, and deleting files and folders
Transfer a file's contents (such as XML or raster) into or out of an attribute in FME
Read downloaded File Storage data using the FeatureReader, or upload data written by the FeatureWriter to File Storage
Retrieve file and folder names, paths, links and other information from File Storage to use elsewhere in a workspace.

How does it work?

The AzureFileStorageConnector uses your Azure Storage account credentials (either via a previously defined FME web connection, or by setting up a new FME web connection right from the transformer) to access the file storage service.

Depending on your choice of actions, it will upload or download files, folders, and attributes; list information from the service; or delete items from the service. On uploads, link attributes can be added to the output features. On List actions, file/folder information are added as attributes.

Usage Notes

This transformer cannot be used to directly move or copy files between different Azure Storage locations. However, multiple AzureFileStorageConnectors can be used to move or copy files with an intermediate download.
The FeatureReader can access Azure File Storage directly, without using the AzureFileStorageConnector. In this case, a permanent local copy of the dataset will not be created.

Configuration

Input Ports

Output Ports

Parameters

Authentication

Credential Source	The AzureFileStorageConnector can use credentials from different sources. Using a web connection integrates best with FME, but in some cases, you may wish to use one of the other sources. Web Connection: - use an Azure Storage web connection stored in the FME web connections database SAS: - use a Shared Account Signature instead of an access key Embedded: - embed an account name and access key as parameters in the transformer Default Azure Credential - Obtain credentials from Microsoft Entra ID, Managed Identity, or Azure CLI. Environment Variables: - use credentials already configured on the system, in the environment variables AZURE_STORAGE_ACCOUNT and AZURE_STORAGE_ACCESS_KEY
Account	Available when the credential source is Web Connection. To create an Azure Storage connection, click the 'Account' drop-down box and select 'Add Web Connection...'. The connection can then be managed via Tools -> FME Options... -> Web Connections.
Account Name and Account Key	Available when the credential source is Embedded. An account name and access key can be specified directly in the transformer instead of in a web connection.
Account Name and Shared Access Signature	Available when the credential source is SAS. An account name and shared access signature can be specified directly in the transformer.

The remaining parameters available depend on the value of the Request > Action parameter. Parameters for each Action are detailed below.

Parameters - Download Action

Download Options

Share	The share the file or folder is in. If valid credentials have been provided as a web connection, you may browse for a share.
Path	The full path of a file or folder on File Storage to download. If valid credentials have been provided as a web connection, you may browse for a location.

Destination

Download as	Select whether to store the downloaded data in a File, Folder or Attribute. File: The downloaded file will be stored in the specified folder. Folder: The downloaded folder will be stored in the specified folder. Attribute: The downloaded file will be stored in the specified attribute.
Download to Attribute	Specify the attribute that will store the contents of the downloaded file. Valid for Download as Attribute only.
Response Body Encoding	For Download as Attribute, you can specify a character set encoding to ensure the output is in a human-readable form. If Auto Detect from HTTP Header is specified but there is no encoding in the Content-Type metadata associated with the data, the output will be returned as raw bytes.
Download to Folder	Specify the path to the folder that will store the downloaded file. Valid for Download as File or Folder.
If File Exists	Specify what to do if the file already exists locally. Valid for Download as File or Folder. Reject: If downloading a file, the input feature will be rejected. If downloading a folder, a rejected feature will be output for each rejected file. Overwrite: Any existing local files or folders will be overwritten with the remote copy.
Include Subfolders	Choose whether to download subfolders of the File Storage source or not. Valid for Download as Folder only.

Output Attributes

The selected attributes will be added to the output feature.

_download_path

Path of the downloaded object on the local file system. This attribute will not be added for Download as Attribute.

Parameters - List Action

List Options

Share	The share the folder is in. If valid credentials have been provided as a web connection, you may browse for a share.
Path	The full path to the folder on File Storage to list. If valid credentials have been provided as a web connection, you may browse for a location.
Include Subfolders	If set to Yes, then subfolders are recursively traversed, and their contents are included in the result.

Output Attributes

The selected attributes will be added to the output feature.

_name	Name of the file or folder
_full_path	Full path of the file or folder
_url	URL to the file or folder.
_file_or_folder	Whether the item is a file or a folder
_file_size	File size (not present for folders)
_last_modified	Date and time when the file was last modified
_relative_path	Path to the item relative to the list path

Parameters - Upload Action

Data Source

Upload	The type of data to be uploaded. File: The specified file will be uploaded. Folder: The specified folder and its contents will be uploaded. Attribute: The contents of the specified attribute will be uploaded. When working with large objects, File is a better choice than Attribute as the data will be streamed directly from disk and not require that the object be stored entirely in memory on a feature. When wanting to upload content from a folder, it is better to upload as a folder instead of setting a fixed path and sending multiple features into the connector to upload as a file.
File to Upload	The file to be uploaded to File Storage if Upload is set to File.
Folder to Upload	The folder to be uploaded to File Storage if Upload is set to Folder.
Include Subfolders	Choose whether to upload subfolders of the Folder to Upload or not.
Contents Only	Yes: Upload only the contents of the folder to the remote destination. No: Upload the folder to the remote destination.
Attribute to Upload as File	The data to be uploaded, supplied from an attribute if Upload is set to Attribute.

Upload Options

Share	The share the folder is in. If valid credentials have been provided as a web connection, you may browse for a share.
Path	The full path to the folder on File Storage to upload to. If valid credentials have been provided as a web connection, you may browse for a location.
Upload with File Name	The name of the file created from the data supplied in Attribute to Upload as File. The name must include a filename extension (for example, .txt, .jpg, .doc).
If File Exists	Specify what to do if the file already exists on File Storage. Reject: If uploading a file, the input feature will be rejected. If uploading a folder, rejected files will be listed in the Rejected Files attribute. Overwrite: Any existing files or folders on File Storage will be overwritten with the local copy.

Metadata

Use this section to specify custom Name and Value pairs of metadata to associate with each uploaded file.

If the name matches a recognized HTTP header value, it will be set such that HTTP requests for the uploaded file will return those headers.

If Content-Type is not specified, then it will be set based on the extension of the uploaded file if possible.

If Content-Encoding is also unset, then a value will also be determined if applicable.

Generate Shared Access Signature

If checked, a Shared Access Signature (SAS) will be generated for the uploaded file. The attributes _sas_url and _sas_token will be added to the output feature. This option is only available for file and attribute upload.

SAS generation requires authenticating using an Account Key. For more information about SAS, please see the Microsoft Azure documentation.

SAS Token Expiry Time	When the token should expire.
IP Address or Range	If provided, restrict access to an IP address or range of IP addresses. Ranges are given in the format “203.0.113.0–203.0.113.255”.
Restrict to HTTPS	If Yes, the token can only be used via HTTPS.

Output Attributes

The selected attributes will be added to the output feature. Only available for file and folder uploads.

_name	Name of the file or folder.
_full_path	Full path of the file or folder.
_url	URL to the file or folder.

Editing Transformer Parameters

Transformer parameters can be set by directly entering values, using expressions, or referencing other elements in the workspace such as attribute values or user parameters. Various editors and context menus are available to assist. To see what is available, click beside the applicable parameter.

How to Set Parameter Values

Defining Values

There are several ways to define a value for use in a Transformer. The simplest is to simply type in a value or string, which can include functions of various types such as attribute references, math and string functions, and workspace parameters.

Using the Text Editor

The Text Editor provides a convenient way to construct text strings (including regular expressions) from various data sources, such as attributes, parameters, and constants, where the result is used directly inside a parameter.

Text Editor

Using the Arithmetic Editor

The Arithmetic Editor provides a convenient way to construct math expressions from various data sources, such as attributes, parameters, and feature functions, where the result is used directly inside a parameter.

Arithmetic Editor

Conditional Values

Set values depending on one or more test conditions that either pass or fail.

Parameter Condition Definition Dialog

Content

Expressions and strings can include a number of functions, characters, parameters, and more.

When setting values - whether entered directly in a parameter or constructed using one of the editors - strings and expressions containing String, Math, Date/Time or FME Feature Functions will have those functions evaluated. Therefore, the names of these functions (in the form @<function_name>) should not be used as literal string values.

Content Types

String Functions	These functions manipulate and format strings.
Special Characters	A set of control characters is available in the Text Editor.
Math Functions	Math functions are available in both editors.
Date/Time Functions	Date and time functions are available in the Text Editor.
Math Operators	These operators are available in the Arithmetic Editor.
FME Feature Functions	These return primarily feature-specific values.
FME Parameters	FME and workspace-specific parameters may be used.
Creating and Modifying User Parameters	Create your own editable parameters.

Dialog Options - Tables

Table Tools

Transformers with table-style parameters have additional tools for populating and manipulating values.

Row Reordering

Enabled once you have clicked on a row item. Choices include:

Add a row
Remove a row
Move current row up one
Move current row down one
Move current row to top
Move current row to bottom

Cut, Copy, and Paste

Enabled once you have clicked on a row item. Choices include:

Cut a row - delete and copy to clipboard
Copy a row to the clipboard
Paste a row from the clipboard

Cut, copy, and paste may be used within a transformer, or between transformers.

Filter

Start typing a string, and the matrix will only display rows matching those characters. Searches all columns. This only affects the display of attributes within the transformer - it does not alter which attributes are output.

Import

Import populates the table with a set of new attributes read from a dataset. Specific application varies between transformers.

Reset/Refresh

Generally resets the table to its initial state, and may provide additional options to remove invalid entries. Behavior varies between transformers.

Note: Not all tools are available in all transformers.

For more information, see Transformer Parameter Menu Options.

Reference

Processing Behavior	Feature-Based
Feature Holding	No
Dependencies	Azure Storage Account
Aliases
History	Released FME 2019.0

FME Community

The FME Community is the place for demos, how-tos, articles, FAQs, and more. Get answers to your questions, learn from other users, and suggest, vote, and comment on new features.

Search for all results about the AzureFileStorageConnector on the FME Community.

Examples may contain information licensed under the Open Government Licence – Vancouver, Open Government Licence - British Columbia, and/or Open Government Licence – Canada.

AzureFileStorageConnector

Typical Uses

How does it work?

Usage Notes

Configuration

Input Ports

Output Ports

Parameters

Delete Options

Download Options

Destination

Output Attributes

List Options

Output Attributes

Data Source

Upload Options

Metadata

Generate Shared Access Signature

Output Attributes

Editing Transformer Parameters

Defining Values

Using the Text Editor

Using the Arithmetic Editor

Conditional Values

Content

Table Tools

Reference

FME Community