Text Entities

autocad_entity: autocad_text

Features with autocad_entity set to autocad_text are stored in and read from drawing files as text entities. A text entity is represented by a single coordinate and the following attributes.

Attribute Name	Contents
autocad_active_anno_scale	This indicates the name of the annotation scale that is actively selected (that is, the scale that is shown when viewing the file directly in AutoCAD). When writing multiple annotation scales on an entity, it helps disambiguate the annotation scale associated with the height. Default: None
autocad_anno_force_visible	This indicates the value of an option to override the ANNOALLVISIBLE system variable for an annotative object, forcing it to display in Autodesk applications, regardless of the current scale. Used in combination with annotation scales. Default: none
autocad_anno_scale{}.drawing_units	The drawing units part of an annotation scale definition in a drawing, defined as a scale from paper units to drawing units. Default: 1
autocad_anno_scale{}.name	The name of an annotation scale, used to represent a reference by an annotation object, to an annotation scale definition in a drawing. Default: none
autocad_anno_scale{}.paper_units	The paper units part of an annotation scale definition in a drawing, defined as a scale from paper units to drawing units. Default: 1
autocad_alignment_x autocad_alignment_y autocad_alignment_z	The alignment coordinate of the text. This location is used in conjunction with the justification and the feature location to place the text correctly. This is primarily of use when performing an AutoCAD-to-AutoCAD translation. To override the justification of source AutoCAD dataset, you need to remove these alignment attributes from the feature and then set the autocad_justfication attribute. This is because when performing an AutoCAD-to-AutoCAD translation, these alignment attributes override the autocad_justification attribute. Note that if autocad_justification is set to autocad_baseline_left for this text, then the alignment point attributes will match the text entity location. Range: Any 64-bit floating point value Default: x, y, and z value of text alignment point Reprojectable: Yes
autocad_backwards (used only by the reader)	Indicates whether the text is backwards. This attribute will only exist if reading a graphical text entity. Default: not applicable since this is a Reader-only attribute.
autocad_big_fontname	The name of the file which contains fonts for large character sets. Range: char[65] Default: No default
autocad_font_bold	Indicates whether the TrueType font related to the text style has bold formatting. Range: Yes \| No Default: No
autocad_font_charset	The Windows TrueType font character set identifier for the related text style. UndefinedCharset = -1 AnsiCharset = 0 UnicodeCharset = 1 SymbolCharset = 2 JapaneseCharset = 128 KoreanCharset = 129 ChineseSimpCharset = 134 ChineseTradCharset = 136 JohabCharset = 130 HebrewCharset = 177 ArabicCharset = 178 GreekCharset = 161 TurkishCharset = 162 VietnameseCharset = 163 ThaiCharset = 222 EastEuropeCharset = 238 RussianCharset = 204 BalticCharset = 186 INTERNALCHARSET = 256 Range: Integer, as above Default: 0
autocad_font_family	The Windows font family identifier for the related text style. RealDWG only. Range: roman swiss modern script decorative do_not_care Range: do_not_care
autocad_font_italic	Indicates whether the TrueType font related to the text style has italic formatting. Range: Yes \| No Default: No
autocad_font_pitch	The Windows font pitch identifier for the related text style. RealDWG only. Range: default \| fixed \| variable Default: default
autocad_font_pitch_family	The Windows font pitch and family identifier for the related text style. Not for RealDWG. Range: Integer Default: 0
autocad_font_typeface	The Windows TrueType font character set identifier for the related text style. Range: char[50] Default: No default
autocad_generation	The generation of the text entry. Range: autocad_normal autocad_upside_down autocad_backwards autocad_upsidedown_backwards Default: autocad_normal
autocad_justification	The justification of the text relative to its insert point. Range: autocad_top_left autocad_top_center autocad_top_right autocad_top_middle autocad_top_aligned autocad_top_fit autocad_middle_left autocad_middle_center autocad_middle_right autocad_middle_middle autocad_middle_aligned autocad_middle_fit autocad_bottom_left autocad_bottom_center autocad_bottom_right autocad_bottom_middle autocad_bottom_aligned autocad_bottom_fit autocad_baseline_left autocad_baseline_center autocad_baseline_right autocad_baseline_middle autocad_baseline_aligned autocad_baseline_fit Default: autocad_baseline_left
autocad_oblique	The oblique angle of the text, which causes the entity to lean to the right or left of vertical, where positive numbers indicate to the right. For convenience, the AutoCAD reader and writer will treat the range of values from 275.0..360.0, as an alternative specification of the range from -85.0..0. Range: -85.0 ..85.0 Default: 0
autocad_original_rotation	The rotation of the text of an entity before a potential transformation, such as a User Coordinate System, is applied by the AutoCAD reader. This value is used preferentially to set the text rotation when writing a text entity. Range: -360.0..360.0 Default: 0
autocad_original_text_size	The text height of an entity before a potential transformation, such as a User Coordinate System, is applied by the AutoCAD reader. This value is used preferentially to set the text size when writing a text entity. Range: 64-bit floating point number > 0 Default: 10
autocad_original_text_string	The contents of a text entity including the character codes used to define its style and formatting. When reading, this is converted into `autocad_text_string`. To set the contents of a text entity when writing, the value of this attribute is used in preference to `autocad_text_string`. Range: char[1024] Default: No default
autocad_overlined (used only by the reader)	Indicates if the text is overlined. This attribute will exist only if reading a graphical text entity. Default: not applicable, since this is a Reader-only attribute.
autocad_rotation	The rotation of the text for an entity. Range: -360.0..360.0 Default: 0 Reprojectable: Yes
autocad_shape_filename	The name of the file which contains the text font definition. Note: AutoCAD shape files should not be confused with Esri shapefiles. AutoCAD shape files hold font and symbol definitions; Esri shapefiles hold spatial features Range: char[65]; Default: txt
autocad_shape_height	The height of the text as defined in shape file. Range: 64-bit floating point number Default: 0
autocad_shape_name	The name of the shape which contains the text font definition. Range: char[33] Default: STANDARD
autocad_shape_rotation	The angle for the text as defined in shape file. Range: 64-bit floating point number Default: 0
autocad_shape_vertical	Indicates if the shape text, as defined in the shape file, is vertical or horizontal. Range: yes \| no Default: None
autocad_shape_width	The width of the text as defined in shape file. Range: 64-bit floating point number Default: 1
autocad_text_size	The text height. Range: 64-bit floating point number > 0 Default: 10 Reprojectable: Yes
autocad_text_string	The text string. Range: char[1024] Default: No default
autocad_tracking_ percent (used only by the reader)	The tracking percent. This attribute will only exist if reading a graphical text entity. Default: not applicable, since this is a Reader-only attribute.
autocad_true_type_font	The name of the TrueType font used to display the text string. For text entities, this attribute is only used by the AutoCAD writer, since single-line text entities do not have support for TrueType fonts. If this attribute is specified on an autocad_text feature, a multiline text entity will be created and written instead of a single-line text entity. Default: No default
autocad_underlined (used only by the reader)	Indicates if the text is underlined. This attribute will only exist if reading a graphical text entity. Default: not applicable, since this is a Reader-only attribute.
autocad_upside_down (used only by the reader)	Indicates if the text is upside down. This attribute will only exist if reading a graphical text entity. Default: not applicable, since this is a Reader-only attribute.
autocad_vertical (used only by the reader)	Indicates if the text is vertical. This attribute will only exist if reading a graphical text entity. Default: not applicable, since this is a Reader-only attribute.
autocad_width_factor	The scaling applied in the x direction which makes the text wider or narrower. However, this does not affect the weight (i.e., boldness) of the text string. Range: 64-bit floating point number > 0 and <= 10000 Default: 1

Attribute Name

Contents

autocad_active_anno_scale

This indicates the name of the annotation scale that is actively selected (that is, the scale that is shown when viewing the file directly in AutoCAD). When writing multiple annotation scales on an entity, it helps disambiguate the annotation scale associated with the height.

Default: None

autocad_anno_force_visible

This indicates the value of an option to override the ANNOALLVISIBLE system variable for an annotative object, forcing it to display in Autodesk applications, regardless of the current scale.

Used in combination with annotation scales.

Default: none

autocad_anno_scale{}.drawing_units

The drawing units part of an annotation scale definition in a drawing, defined as a scale from paper units to drawing units.

Default: 1

autocad_anno_scale{}.name

The name of an annotation scale, used to represent a reference by an annotation object, to an annotation scale definition in a drawing.

Default: none

autocad_anno_scale{}.paper_units

The paper units part of an annotation scale definition in a drawing, defined as a scale from paper units to drawing units.

Default: 1

autocad_alignment_x

autocad_alignment_y

autocad_alignment_z

The alignment coordinate of the text. This location is used in conjunction with the justification and the feature location to place the text correctly. This is primarily of use when performing an AutoCAD-to-AutoCAD translation.

To override the justification of source AutoCAD dataset, you need to remove these alignment attributes from the feature and then set the autocad_justfication attribute. This is because when performing an AutoCAD-to-AutoCAD translation, these alignment attributes override the autocad_justification attribute.

Note that if autocad_justification is set to autocad_baseline_left for this text, then the alignment point attributes will match the text entity location.

Range: Any 64-bit floating point value

Default: x, y, and z value of text alignment point

Reprojectable: Yes

autocad_backwards

(used only by the reader)

Indicates whether the text is backwards.

This attribute will only exist if reading a graphical text entity.

Default: not applicable since this is a Reader-only attribute.

autocad_big_fontname

The name of the file which contains fonts for large character sets.

Range: char[65]

Default: No default

autocad_font_bold

Indicates whether the TrueType font related to the text style has bold formatting.

Range: Yes | No

Default: No

autocad_font_charset

The Windows TrueType font character set identifier for the related text style.

UndefinedCharset = -1
AnsiCharset = 0
UnicodeCharset = 1
SymbolCharset = 2
JapaneseCharset = 128
KoreanCharset = 129
ChineseSimpCharset = 134
ChineseTradCharset = 136
JohabCharset = 130
HebrewCharset = 177
ArabicCharset = 178
GreekCharset = 161
TurkishCharset = 162
VietnameseCharset = 163
ThaiCharset = 222
EastEuropeCharset = 238
RussianCharset = 204
BalticCharset = 186
INTERNALCHARSET = 256

Range: Integer, as above

Default: 0

autocad_font_family

The Windows font family identifier for the related text style.

RealDWG only.

Range:

roman
swiss
modern
script
decorative
do_not_care

Range: do_not_care

autocad_font_italic

Indicates whether the TrueType font related to the text style has italic formatting.

Range: Yes | No

Default: No

autocad_font_pitch

The Windows font pitch identifier for the related text style.

RealDWG only.

Range: default | fixed | variable

Default: default

autocad_font_pitch_family

The Windows font pitch and family identifier for the related text style.

Not for RealDWG.

Range: Integer

Default: 0

autocad_font_typeface

The Windows TrueType font character set identifier for the related text style.

Range: char[50]

Default: No default

autocad_generation

The generation of the text entry.

Range:

autocad_normal
autocad_upside_down
autocad_backwards
autocad_upsidedown_backwards

Default: autocad_normal

autocad_justification

The justification of the text relative to its insert point.

Range:

autocad_top_left
autocad_top_center
autocad_top_right
autocad_top_middle
autocad_top_aligned
autocad_top_fit
autocad_middle_left
autocad_middle_center
autocad_middle_right
autocad_middle_middle
autocad_middle_aligned
autocad_middle_fit
autocad_bottom_left
autocad_bottom_center
autocad_bottom_right
autocad_bottom_middle
autocad_bottom_aligned
autocad_bottom_fit
autocad_baseline_left
autocad_baseline_center
autocad_baseline_right
autocad_baseline_middle
autocad_baseline_aligned
autocad_baseline_fit

Default: autocad_baseline_left

autocad_oblique

The oblique angle of the text, which causes the entity to lean to the right or left of vertical, where positive numbers indicate to the right.

For convenience, the AutoCAD reader and writer will treat the range of values from 275.0..360.0, as an alternative specification of the range from -85.0..0.

Range: -85.0 ..85.0

Default: 0

autocad_original_rotation

The rotation of the text of an entity before a potential transformation, such as a User Coordinate System, is applied by the AutoCAD reader. This value is used preferentially to set the text rotation when writing a text entity.

Range: -360.0..360.0

Default: 0

autocad_original_text_size

The text height of an entity before a potential transformation, such as a User Coordinate System, is applied by the AutoCAD reader.

This value is used preferentially to set the text size when writing a text entity.

Range: 64-bit floating point number > 0

Default: 10

autocad_original_text_string

The contents of a text entity including the character codes used to define its style and formatting.

When reading, this is converted into autocad_text_string.

To set the contents of a text entity when writing, the value of this attribute is used in preference to autocad_text_string.

Range: char[1024]

Default: No default

autocad_overlined

(used only by the reader)

Indicates if the text is overlined.

This attribute will exist only if reading a graphical text entity.

Default: not applicable, since this is a Reader-only attribute.

autocad_rotation

The rotation of the text for an entity.

Range: -360.0..360.0

Default: 0

Reprojectable: Yes

autocad_shape_filename

The name of the file which contains the text font definition.

Note: AutoCAD shape files should not be confused with Esri shapefiles. AutoCAD shape files hold font and symbol definitions; Esri shapefiles hold spatial features

Range: char[65];

Default: txt

autocad_shape_height

The height of the text as defined in shape file.

Range: 64-bit floating point number

Default: 0

autocad_shape_name

The name of the shape which contains the text font definition.

Range: char[33]

Default: STANDARD

autocad_shape_rotation

The angle for the text as defined in shape file.

Range: 64-bit floating point number

Default: 0

autocad_shape_vertical

Indicates if the shape text, as defined in the shape file, is vertical or horizontal.

Range: yes | no

Default: None

autocad_shape_width

The width of the text as defined in shape file.

Range: 64-bit floating point number

Default: 1

autocad_text_size

The text height.

Range: 64-bit floating point number > 0

Default: 10

Reprojectable: Yes

autocad_text_string

The text string.

Range: char[1024]

Default: No default

autocad_tracking_
percent

(used only by the reader)

The tracking percent.

This attribute will only exist if reading a graphical text entity.

Default: not applicable, since this is a Reader-only attribute.

autocad_true_type_font

The name of the TrueType font used to display the text string.

For text entities, this attribute is only used by the AutoCAD writer, since single-line text entities do not have support for TrueType fonts.

If this attribute is specified on an autocad_text feature, a multiline text entity will be created and written instead of a single-line text entity.

Default: No default

autocad_underlined

(used only by the reader)

Indicates if the text is underlined.

This attribute will only exist if reading a graphical text entity.

Default: not applicable, since this is a Reader-only attribute.

autocad_upside_down

(used only by the reader)

Indicates if the text is upside down.

This attribute will only exist if reading a graphical text entity.

Default: not applicable, since this is a Reader-only attribute.

autocad_vertical

(used only by the reader)

Indicates if the text is vertical.

This attribute will only exist if reading a graphical text entity.

Default: not applicable, since this is a Reader-only attribute.

autocad_width_factor

The scaling applied in the x direction which makes the text wider or narrower. However, this does not affect the weight (i.e., boldness) of the text string.

Range: 64-bit floating point number > 0 and <= 10000

Default: 1